Blown In Insulation in Irving - Same-Day Service, Done Right the First Time

Fast, Reliable Blown In Insulation Across Irving

Blown in insulation in Irving typically runs $1,400 to $3,600 for a full attic retrofit, depending on square footage and current R-value. Most jobs are done in one trip, same day. We know Irving’s housing stock from the inside out: brick-veneer tract homes from the 1960s through the 1990s, slab-on-grade foundations, and attics where original fiberglass has settled to nearly nothing after decades of clay soil movement. Call (940) 748-1726 for a written price before any work starts.

Call (940) 748-1726

Dispatching from our Dallas-Fort Worth office, our crews serve Irving locally. We carry the materials on the truck, so a retrofit is usually a single visit, not a three-appointment ordeal.

Key Takeaways

• Full attic blown in insulation in Irving costs $1,400 to $3,600, with written pricing before we start.
• Original blown-in fiberglass in Irving’s 1960s-1990s homes often settles to 4 inches or less, leaving thermal voids.
• Every job includes the 365-Day Done Right Promise: if the work fails within a year, we return free.
• We answer calls 24/7 with a live person. No voicemail.
• For current pricing and scheduling, call (940) 748-1726.

Why Alden Insulation Dallas Is Irving’s Preferred Blown In Insulation Company

Homeowners in Irving call us because they want the job done by the book. We are part of the Garrison Partners family, established 2002, and we operate under The Garrison Standard. That means a background-checked, uniformed technician, a written price before a single tool comes off the truck, and a written guarantee on every job. No revisions at the door.

We have worked in Valley Ranch, Las Colinas, and the older neighborhoods east of MacArthur. In those areas, we see the same pattern over and over: attics that look full but are not performing. The reason is usually settling. Fiberglass blown decades ago compresses under its own weight, especially when the house sits on Irving’s expansive clay soil, which shifts and vibrates through every wall and ceiling cavity.

Our response time to Irving is same day or next day for most calls. If you have a hot upstairs bedroom and a thermal-imaging inspection shows the insulation has collapsed, we can often be out the next morning. Calls are answered by a real person, 24/7. You will not get a call center script.

Learn more about how we approach the work on our Blown In Insulation service hub.

Loose Fill Insulation in Irving

Loose Fill Insulation is what many Irving homeowners need when the original attic insulation has settled below the ceiling joists. We blow it in loose so it fills every irregular bay, around wires, around recessed cans, and into the corners where batts can not reach. In Irving, the typical job involves blowing fiberglass or cellulose over an existing thin layer, or in some cases, removing the old material first.

Most loose fill attic retrofits in Irving run $1,400 to $3,600. That covers vacuuming out severely settled material where needed, air sealing around the obvious bypasses, and blowing to the target R-value.

Attic Settling Remediation

In Irving’s 1960s to 1980s brick-veneer homes, the original blown-in fiberglass often compresses to 4 inches or less. That puts effective R-value in the R-9 to R-14 range, far below the R-38 recommended for this climate. We blow new fiberglass or cellulose over the top after confirming the old layer is dry and not moldy.

Whole-Home Coverage

Loose fill works well for Irving’s slab-on-grade ranch and two-story homes because it conforms to the framing. We check the walls in two-story homes where the first-floor ceiling often has hidden cavities that batts miss.

Blown In Insulation Contractors in Irving

Blown In Insulation Contractors in Irving are not all the same. We are a dedicated insulation crew, not a general handyman service. That distinction matters when you are dealing with settled fiberglass, hidden air leaks, and the moisture problems that come from Irving’s humid summers.

Our installers use thermal imaging on most Irving retrofits. That is how we found a 1972 two-story in Valley Ranch where the original R-19 fiberglass had settled to just 4 inches in many bays. The homeowner was surprised because the attic looked full from the hatch. But our one-trip dense-pack retrofit brought the R-value back to R-38 and eliminated the hot master bedroom.

One-Trip Retrofit for Busy Homeowners

We carry everything on the truck: fiberglass or cellulose, hoses, sealing materials, and the thermal camera. For most Irving homes, the whole job takes one working day. You do not need to clear your schedule for a week.

Clay Soil and Settled Insulation

Irving’s notorious clay soil expands and contracts with moisture, and that movement transfers through slab foundations into walls and ceilings over decades. It is a major reason original attic insulation settles unevenly. We see this more in the central and east Irving neighborhoods than in the newer west subdivisions.

Trusted Brands We Service in Irving

We install products from Owens Corning, GreenFiber, Johns Manville, Knauf, Rockwool, and CertainTeed. For Irving’s humid attic conditions, we often recommend GreenFiber cellulose because it fills densely around framing and resists air movement. For homeowners who prefer fiberglass, Owens Corning loose fill is a solid choice. We stock materials locally in the DFW area, so we are not waiting on a distributor to ship from out of state. That means faster turnaround for Irving customers, especially during the rush before summer heat sets in.

Common Blown In Insulation Problems We See in Irving Homes

• Settled original fiberglass leaving ceiling joists exposed. In 1970s through 1990s Irving tract homes, the top of the joists often sits bare. Heat pours into upstairs rooms, and the homeowner only notices when one bedroom stays 5 to 10 degrees hotter than the rest of the house.
• Air leaks around recessed lights and bath fans. In Irving’s slab-on-grade homes, humid attic air condenses on ceilings around these penetrations. Drywall stains appear, and homeowners blame the insulation when the real culprit is bypass leakage.
• Blown-in installed over old batt insulation trapping moisture. In two-story Irving homes with poor attic ventilation, adding new material over an old vapor barrier can hold moisture against the roof deck. That leads to mold and then a misdiagnosis that the new insulation failed.
• Low R-value from original 1960s construction. Many Irving ranches built before the 1980s have R-11 or R-19 batts in the attic. That is roughly half of what today’s climate demands. In hot, humid summers, that means the AC runs constantly.

Pricing for Blown In Insulation in Irving, TX

We Also Serve Cities Near Irving

From our DFW dispatch office, our crews also serve Irving neighbors in Dallas, Hutchins, Grand Prairie, and Cedar Hill. If you are in one of those cities and need blown in insulation, the same written-price guarantee and same crew apply.

FAQs About Blown In Insulation in Irving